GENERAL PURPOSE SAWS

Home » Popular Tools » GENERAL PURPOSE SAWS

Alternate Top

These saws are designed for general sizing and cutting of natural woods. A higher number of teeth provides a finer edge to the cut, but should be used only on thinner material. The saw blades designated by the prefix GAM contain Micro-Sheen C-4 sub-micron carbide, which provides longer tool life. The blades designated by the prefix GAL have laser cuts in the body to help reduce noise.

DIAMETER TEETH BORE AND PINHOLE KERF PLATE DESIGN HOOK ORDER ID
7 1/4″ 24T 5/8″ .110″ .079″ ATB 20 RS72524
7 1/4″ 40T 5/8″ .110″ .079″ ATB 10 GA72540
7 1/4″ 60T 5/8″ .110″ .079″ ATB 10 GA72560
8″ 40T 5/8″ .118″ .079″ ATB 10 GA840
8″ 60T 5/8″ .118″ .079″ ATB 10 GA860
9″ 40T 5/8″ .126″ .087″ ATB 10 GA940
9″ 60T 5/8″ .126″ .087″ ATB 10 GA960
250mm 60T 30mm, 2/7/42 3.2mm 2.2mm ATB 10 GAM2503060
250mm 80T 30mm, 2/7/42 3.2mm 2.2mm ATB 10 GAM2503080
10″ 40T 5/8″ .126″ .087″ ATB 10 GA1040
10″ 40T 5/8″ .126″ .087″ ATB 10 GAL1040
10″ 60T 5/8″ .126″ .087″ ATB 10 GA1060
10″ 60T 5/8″ .126″ .087″ ATB 10 GAM1060
10″ 60T 5/8″ .126″ .087″ ATB 10 GAL1060
10″ 80T 5/8″ .126″ .087″ ATB 10 GA1080
10″ 80T 5/8″ .126″ .087″ ATB 10 GAM1080
10″ 80T 5/8″ .126″ .087″ ATB 10 GAL1080
10″ 100T 5/8″ .126″ .087″ ATB 10 GA1010
300mm 72T 30mm, 2+2PH 3.2mm 2.2mm ATB 10 GAM3003072
300mm 96T 30mm, 2+2PH 3.2mm 2.2mm ATB 10 GAM3003096
12″ 36T 1″ .126″ .087″ ATB 20 RS1236
12″ 48T 1″ .134″ .094″ ATB 10 GA1248
12″ 60T 1″ .134″ .094″ ATB 10 GA1260
12″ 80T 1″ .134″ .094″ ATB 10 GA1280
12″ 80T 1″ .134″ .094″ ATB 10 GAL1280
12″ 80T 1″ .165″ .118″ ATB 10 GA1280CW
12″ 80T 5/8″ .134″ .094″ ATB 10 GA1280P
12″ 100T 1″ .126″ .087″ ATB 10 TS1210
350mm 72T 30mm, 2+2PH 3.5mm 2.5mm ATB 10 GAM3503072
350mm 96T 30mm, 2+2PH 3.2mm 2.5mm ATB 10 GAM3503096
14″ 40T 1″ .184″ .134″ ATB 0 GA1440
14″ 60T 1″ .157″ .118″ ATB 10 GA1460
14″ 60T 1″ .157″ .118″ ATB 10 GAL1460
14″ 80T 1″ .157″ .118″ ATB 10 GA1480
14″ 80T 1″ .157″ .118″ ATB 10 GAL1480
14″ 100T 1″ .157″ .118″ ATB 10 GA1410
14″ 120T 1″ .165″ .118″ ATB 10 GA1412
400mm 60T 30mm 3.5mm 2.5mm ATB 15 GA4003060
400mm 120T 30mm 4.6mm 3.4mm ATB 10 GA4003012
16″ 40T 1″ .185″ .134″ ATB 10 GA1640
16″ 54T 1″ .165″ .126″ ATB 10 GA1654HD
16″ 60T 1″ .165″ .126″ ATB 10 GA1660
16″ 80T 1″ .165″ .126″ ATB 10 GA1680
16″ 100T 1″ .165″ .126″ ATB 10 GA1610
18″ 40T 1″ .180″ .134″ ATB 10 GA1840
18″ 60T 1″ .180″ .134″ ATB 10 GA1860
18″ 80T 1″ .180″ .134″ ATB 10 GA1880
18″ 100T 1″ .180″ .134″ ATB 10 GA1810
18″ 120T 1″ .180″ .134″ ATB 10 GA1812
18″ 140T 1″ .180″ .134″ ATB 10 GA1814
19″ 140T 1″ .180″ .134″ ATB 10 GA19140
500mm 96T 70mm, 6/8/220 5.0mm 3.5mm ATB 10 GA5007096*
500mm 120T 30mm, 2/15/63 5.0mm 3.5mm ATB 10 GA5003012*
500mm 120T 70mm, 6/8/220 5.0mm 3.5mm ATB 10 GA5007012*
500mm 144T 30mm, 2/15/63 5.0mm 3.5mm ATB 10 GA50030144*
500mm 144T 35mm, 2/15/63 4.8mm 3.6mm ATB 5 GA50035144*
20″ 40T 1″ .194″ .134″ ATB 10 GA2040
20″ 60T 1″ .180″ .134″ ATB 10 GA2060
20″ 80T 1″ .180″ .134″ ATB 10 GA2080
20″ 100T 1″ .180″ .134″ ATB 10 GA2010
20″ 120T 1″ .180″ .134″ ATB 10 GA2012
520mm 144T 30mm, 2/15/63 5.0mm 3.5mm ATB 10 GA52030144*
600mm 144T 30mm, 2/15/63 5.0mm 3.5mm ATB 10 GA60030144*
24″ 40T 1″ .245″ .165″ ATB 5 GA2440
26″ 80T 1″ .245″ .165″ ATB 5 GA2680A
26″ 100T 1″ .245″ .165″ ATB 5 GA2610A
26″ 120T 1″ .245″ .165″ ATB 5 GA2612
28″ 80T 1″ .245″ .165″ ATB 5 GA2880
30″ 80T 1 1/4″, 2 pins .260″ .200″ ATB 10 TRIAD3080A**

Notes

*These 500mm, 520mm, and 600mm are for the Grecon and Paul optimizing up cut saws.

** This blade is for Triad Open Stringer saw.

Triple Chip

These saws are designed for high production cutting of natural woods, plywood, chipboard, and MDF. The TCG teeth offer less wear than the ATB with nearly the same quality of cut. Blades designated by the prefix GTM contain Micro-Sheen C-4 sub-micron carbide, which provide a longer tool life. The blades designated by the prefix GTL have laser cuts in the body to help reduce noise.

DIAMETER TEETH BORE AND PINHOLE KERF PLATE DESIGN HOOK ORDER ID
7 1/4″ 40T 5/8″ .110″ .079″ TCG 10 GT740
7 1/4″ 60T 5/8″ .110″ .079″ TCG 10 GT760
8″ 40T 5/8″ .118″ .079″ TCG 10 GT840
8″ 60T 5/8″ .118″ .079″ TCG 10 GT860
220mm 64T 30mm, 2/7/42 3.2mm 2.2mm TCG 10 GTM22064
250mm 60T 30mm, 2/7/42 3.2mm 2.2mm TCG 10 GTM2503060
250mm 80T 30mm, 2/7/42 3.2mm 2.2mm TCG 10 GTM2503080
10″ 40T 5/8″ .126″ .087″ TCG 10 GT1040
10″ 40T 5/8″ .126″ .087″ TCG 10 GTM1040
10″ 60T 5/8″ .126″ .087″ TCG 10 GT1060
10″ 60T 5/8″ .126″ .087″ TCG 10 GTM1060
10″ 60T 5/8″ .126″ .087″ TCG 10 GTL1060
10″ 80T 5/8″ .126″ .087″ TCG 10 GT1080
10″ 80T 5/8″ .126″ .087″ TCG 10 GTM1080
10″ 80T 5/8″ .126″ .087″ TCG 10 GTL1080
10″ 80T 5/8″ .126″ .087″ TCG -5 LM1080TCG
10″ 100T 5/8″ .126″ .087″ TCG 10 GT1010
300mm 72T 30mm, 2+2 PH 3.2mm 2.2mm TCG 10 GTM3003072
300mm 96T 30mm, 2+2 PH 3.2mm 2.2mm TCG 10 GTM3003096
12″ 48T 1″ .134″ .094″ TCG 10 GT1248
12″ 60T 1″ .134″ .094″ TCG 10 GT1260
12″ 72T 1″ .134″ .094″ TCG 10 GTM1272
12″ 80T 1″ .134″ .094″ TCG 10 GT1280
12″ 80T 1″ .134″ .094″ TCG 10 GTM1280
12″ 96T 1″ .142″ .102″ TCG 10 GTM1296
350mm 54T 30mm 3.5mm 2.4mm TCG 10 GTM3503054
350mm 80T 30mm, 2 +2 PH 3.5mm 2.5mm TCG 10 GTM3503080
350mm 96T 30mm, 2+2 PH 3.5mm 2.5mm TCG 10 GTM3503096
14″ 54T 1″ .138″ .094″ TCG 10 GTM1454
14″ 60T 1″ .157″ .118″ TCG 10 GT1460
14″ 80T 1″ .157″ .118″ TCG 10 GT1480
14″ 100T 1″ .157″ .118″ TCG 10 GT1410
16″ 60T 1″ .165″ .126″ TCG 10 GT1660
16″ 80T 1″ .165″ .126″ TCG 10 GT1680
16″ 100T 1″ .165″ .126″ TCG 10 GT1610
16″ 100T 1″ .165″ .126″ TCG -5 GTM1610*
16″ 120T 1″ .165″ .126″ TCG 10 GT1612
16″ 120T 1″ .165″ .126″ TCG -5 GTM1612*
18″ 60T 1″ .180″ .134″ TCG 10 GT1860
18″ 80T 1″ .180″ .134″ TCG 10 GT1880
18″ 100T 1″ .180″ .134″ TCG 10 GT1810
18″ 100T 1″ .180″ .134″ TCG -5 GTM1810*
18″ 120T 1″ .180″ .134″ TCG 10 GT1812
18″ 120T 1″ .180″ .134″ TCG -5 GTM1812*
20″ 60T 1″ .180″ .134″ TCG 10 GT2060
20″ 80T 1″ .180″ .134″ TCG 10 GT2080
20″ 100T 1″ .180″ .134″ TCG 10 GT2010
20″ 120T 1″ .180″ .134″ TCG 10 GT2012

Notes

*With their negative hook design and with the use of Micro-Sheen sub-micron tips the GTM1610, GTM1612, GTM1810, and GTM1812 are excellent for cutting counter tops.