DOUBLE MITER SAW DG 244
Description
The proven elumatec principle “Cutting from below”:
- This freely accessible support tables
- Large blade diameter and optimum utilization of the saw blade cutting capacity provides enough for all interface types
- In elumatec course: point dimension at all angular settings. This required at different profile heights no different length calculations
- The universal pivoting and tilting of both saw heads allows cutting of high and wide profiles as well as compound mitres. Thus many profiles can be cut without supplements
- Point dimension of all variants. Thus, no complicated calculations necessary length. The major advantage of special angles
- Hoods
- Comes standard with saw blades
- Pulsed
Specifications
- Minimum cutting length of 375 mm at 90 °
- Minimum cutting length at 45 ° inclined 375 mm
- Swivel range inward pneumatic 90 ° – 45 °
(manually to 22.5 ° to 140 ° inside and outside with digital display) - Tilt range inward pneumatic 90 ° – 45 °
(intermediate angle manually with digital display and turret stop) - Cutting capacity see cutting diagram
- Saw blade diameter 550 mm
- Spindle speed 2.250 1/min.
- Voltage 230/400 V, 3 ~, 50 Hz
- Power output each motor 4 kW
- Compressed air supply 7 bar
- Air consumption per working cycle 40 l without mist spray, 64 l with mist spray
Cutting length variants
- 4,500 mm
- 6,000 mm
- 7,500 mm
Options
- DG 244 M machine bed made of steel sheet
- Hydro-pneumatic saw feed
- Cutting feed – smallest cutting length 400 mm
- Profile lifting bars
- Software add-on for E 555: optimization program,
software module for Crosscut and excess length cuts - Mobile or automatically swing away workrests
- Material clamping devices
- Transom and first cut stop
- Label printer for version with E 355 and E 555
- Suction, suction pumps
- Clock means
- Roller conveyor
- Blades
- High performance cutting fluid
Control variants