H 235
Our range of AutoCut Series Mitering Bandsaws has been expanded to include the small but powerful MODEL H235 utility model. Small enough to be economical but heavy enough for your light production, tool room, job shop, or maintenance needs. Available in 115/1/60 so it can plug in anywhere yet still has a three phase motor and gearbox! We also have an optional ‘mobile attachment’ so the machine may be quickly and easily moved about. The Machine quickly & accurately miters 0-60 degrees to the right.
Each machine has an indicator for:
-Power On
-Correct Blade Tension
-Broken Blade
-Bandwheel doors open
Each machine also is equipped with:
-Quick clamp vising
-Quick adjust vising
-Quick & easy mitering
The H235 is available in 1 configuration:
AutoCut operation. Solenoid controlled; with the push of a button, the blade starts (infinitely variable, at the rate you have pre-set), the coolant comes on, the sawframe comes down at a pre-set rate of your choice, and everything shuts off at the bottom. Vise clamping & sawframe raise are manually controlled. Each subsequent cut will be made exactly the same as the first one, with exactly the same settings & rates.
Specifications:
| HP | 1 |
| Electricals (specify one) | 115-1-60 |
| Blade Length | 8’3” |
| Blade width | 3/4” |
| Blade Speeds | variable 65-320 |
| Max vise opening | 9 (in) |
| Weight | 500 |
| Coolant capacity | 1.5 gallons |
| Work Height | 29.5” |
Capacity Chart:
|
90 |
8 |
7.75 |
4.75 x 6.25 |
|
45 (r) |
5 |
4.75 |
3 x 5 |
|
60 (r) |
2.75 |
2.25 |
2 x 4 |
Accessories: (All Accessories can be viewed by clicking link)
AC100 Freestanding Roller Conveyor 12” x 5’
AC101 Freestanding Roller Conveyor 12” x 10’
AC230 Mobile Kit
H 275
This Machine is a manually operated utility band saw. It Miters easily to
the right up to 60 degrees and has variable blade speeds. For a Machine that
miters both left and right and has variable speeds please see our
model H 310 M (AutoCut Series).
Standard Equipment Includes:
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Electricals to NFPA-79 Electrical Standards
Bi-Metal Blade
Carbide blade guides
Shutoff for broken blade or low tension
Blade drive load monitor
Full coolant System
Operators Tools
All Safety Guards
More Pictures at bottom of page
Specifications:
| HP | 2 |
| Electricals (specify one) | 220/1 |
| Blade Length | 10’1” |
| Blade width | 1” |
| Blade Speeds | 65-320 variable |
| Max vise opening | 11. (in) |
| Weight | 600lbs |
| Coolant capacity | 4 gallons |
| Work Height | 37” |
Capacity Chart:
|
90 |
10″ |
||
|
45 (r) |
7″ |
||
|
60 (r) |
4″ |
Accessories: (All Accessories can be viewed by clicking link)
AC100 Freestanding Roller Conveyor 12” x 5’
AC101 Freestanding Roller Conveyor 12” x 10’
AC300 Custom infeed/outfeed conveyor mounted to machine 12”x5’
AC301 Custom infeed/outfeed conveyor mounted to machine 12”x10’
AC303 Accu-cut material stop w/ scale 0-72” long
AC106 Vertical Guide Rollers, (set of two)
AC125 Custom worktable infeed/outfeed 6’ conveyor mounted to machine
AC103 Additional 6’ for above
AC133 Custom worktable infeed/outfeed 6’ conveyor mounted to machine w/ measuring system
AC105 Additional 6’ for above
AC106 Vertical Guide Rollers, (set of two)
Vertical side guide rollers for custom conveyors, pair of 2
AC118 Custom outfeed roller conveyor with Digital measuring system, 12” wide x 12’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
H 310 M
Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models.
Standard Equipment Includes:
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Totally Enclosed Transmission
Electricals to NFPA-79 Electrical Standards
Bi-Metal Blade
Carbide blade guides
Sawframe setup, controlled rate & rapid approach
Shutoff for broken blade or low tension
Blade drive load monitor
Full coolant System
Operators Tools
All Safety Guards
Variable speed
More Pictures at bottom of page
Specifications:
| HP | 2 |
| Electricals (specify one) | 220/3 or 220/1 -for 208,440,480 add $350 |
| Blade Length | 9’1” |
| Blade width | 1” |
| Blade Speeds | Variable 55-330fpm |
| Max vise opening | 11.25 (in) |
| Weight | 850 |
| Coolant capacity | 3 gallons |
| Work Height | 37” |
Capacity Chart:
|
90 |
10 |
9 |
5 11/16 x 11 |
|
45 (l) |
6.25 |
6 |
4 x 7 7/8 |
|
60 (r) |
5.25 |
3.75 |
3.5 x 5 1/8 |
Accessories: (All Accessories can be viewed by clicking link)
AC100 Freestanding Roller Conveyor 12” x 5’
AC101 Freestanding Roller Conveyor 12” x 10’
AC300 Custom infeed/outfeed conveyor mounted to machine 12”x5’
AC301 Custom infeed/outfeed conveyor mounted to machine 12”x10’
AC303 Accu-cut material stop w/ scale 0-72” long
AC106 Vertical Guide Rollers, (set of two)
AC125 Custom worktable infeed/outfeed 6’ conveyor mounted to machine
AC103 Additional 6’ for above
AC133 Custom worktable infeed/outfeed 6’ conveyor mounted to machine w/ measuring system
AC105 Additional 6’ for above
AC106 Vertical Guide Rollers, (set of two)
Vertical side guide rollers for custom conveyors, pair of 2
AC118 Custom outfeed roller conveyor with Digital measuring system, 12” wide x 12’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
H 350 M
Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, clamping is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saw is available in Manual and Semi-Automatic models.
Standard Equipment Includes:
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Totally Enclosed Transmission
Electricals to NFPA-79 Electrical Standards
Bi-Metal Blade
Carbide blade guides
Sawframe setup, controlled rate & rapid approach
Shutoff for broken blade or low tension
Blade drive load monitor
Full coolant System
Operators Tools
All Safety Guards
Variable speed
More Pictures at bottom of page
Specifications:
| HP | 2.5 |
| Electricals (specify one) | 220/3 or 220/1 -for 208,440,480 add $400 |
| Blade Length | 11’1” |
| Blade width | 1” |
| Blade Speeds | Variable 55-330fpm |
| Max vise opening | 14 (in) |
| Weight | 1400 |
| Coolant capacity | 5 gallons |
| Work Height | 37” |
Capacity Chart:
|
90 |
12 |
11 |
7.75 x 13.75 |
|
45 (l) |
9 3/8 x |
8 5/8 |
7.75 x 9 |
|
60 (r) |
6 5/8 |
5 7/8 |
3 7/8 x 6 11/16 |
Accessories: (All Accessories can be viewed by clicking link)
AC107 Freestanding Roller Conveyor 15” wide x 5’ long, 1000 lb.
AC108 Freestanding Roller Conveyor 15” wide x 10’ long, 2000 lb.
AC109 Custom infeed/outfeed roller conveyor 15” wide x 6’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
AC110 Additional 6’ section for above conveyor
AC112 Custom outfeed roller conveyor with built in measuring system, 15” wide x 6’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
AC113 Additional 6’ section for above conveyor
AC114 Vertical side guide rollers for custom conveyors, pair of 2