H 310 SA
Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models.
Standard Equipment Includes:
Full Electronic Control / Information System
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Heavy Duty Vari-Speed, Totally Enclosed Transmission
Electricals to NFPA-79 Electrical Standards
Bi-Metal Blade
Carbide blade guides
Sawframe setup, controlled rate & rapid approach
Shutoff for broken blade or low tension
Blade drive load monitor
Full coolant System
Operators Tools
All Safety Guards
Specifications:
HP | 2 |
Electricals (specify one) | 208, 220, 240, 400, 440, 480 3phase |
Blade Length | 9’1” |
Blade width | 1” |
Blade Speeds | Variable 55-330fpm |
Max vise opening | 11.25 (in) |
Weight | 1000 |
Coolant capacity | 5 gallons |
Work Height | 37” |
Capacity Chart:
90 |
10 |
9 |
5 11/16 x 11 |
45 (l) |
6.25 |
7 |
4 x 7 7/8 |
60 (r) |
5 |
3.75 |
3.5 x 5 1/8 |
Accessories: (All Accessories can be viewed by clicking link)
AC100 Freestanding Roller Conveyor 12” x 5’
AC101 Freestanding Roller Conveyor 12” x 10’
AC300 Custom infeed/outfeed conveyor mounted to machine 12”x5’
AC301 Custom infeed/outfeed conveyor mounted to machine 12”x10’
AC303 Accu-cut material stop w/ scale 0-72” long
AC106 Vertical Guide Rollers, (set of two)
AC125 Custom worktable infeed/outfeed 6’ conveyor mounted to machine
AC103 Additional 6’ for above
AC133 Custom worktable infeed/outfeed 6’ conveyor mounted to machine w/ measuring system
AC105 Additional 6’ for above
AC106 Vertical Guide Rollers, (set of two)
Vertical side guide rollers for custom conveyors, pair of 2
AC118 Custom outfeed roller conveyor with Digital measuring system, 12” wide x 12’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
AC 117 Footswitch
AC 116 Built in mist coolant system
H 400 SA
Our AutoCut Series Mitering Band saws feature mitering up to 45° to the left and up to 60° right! This series features an array of operating characteristics that gives these machines the designation the AutoCut Series! Band saw operation is push button, vising is quick and simple, and the band saw operators console information system includes data such as power on, blade speeds, drive motor load, blade tension, broken blade, and overload conditions. The band saws are available in Manual and Semi-Automatic models.
Standard Equipment Includes:
Full Electronic Control / Information System
Heavy Duty Drive, TEFC Motor
24 Volt Controls
Heavy Duty Vari-Speed, Totally Enclosed Transmission
Electricals to NFPA-79 Electrical Standards
Bi-Metal Blade
Carbide blade guides
Sawframe setup, controlled rate & rapid approach
Shutoff for broken blade or low tension
Blade drive load monitor
Full coolant System
Operators Tools
All Safety Guards
Specifications:
HP | 2.5 |
Electricals (specify one) | 208, 220, 240, 400, 440, 480 3phase |
Blade Length | 13’2″ |
Blade width | 1.25” |
Blade Speeds | Variable 55-330fpm |
Max vise opening | 14 (in) |
Weight | 1600 |
Coolant capacity | 5 gallons |
Work Height | 37” |
Capacity Chart:
90 |
12 |
11 |
7.75 x 13.75 |
45 (l) |
9 3/8 x |
8 5/8 |
7.75 x 9 |
60 (r) |
6 5/8 |
5 7/8 |
3 7/8 x 6 11/16 |
Accessories: (All Accessories can be viewed by clicking link)
AC107 Freestanding Roller Conveyor 15” wide x 5’ long, 1000 lb.
AC108 Freestanding Roller Conveyor 15” wide x 10’ long, 2000 lb.
AC109 Custom infeed/outfeed roller conveyor 15” wide x 6’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
AC110 Additional 6’ section for above conveyor
AC112 Custom outfeed roller conveyor with built in measuring system, 15” wide x 6’ long, with cover plates between rollers, coolant return through, micro-adjustable legs, mounted to machine
AC113 Additional 6’ section for above conveyor
AC114 Vertical side guide rollers for custom conveyors, pair of 2
AC117 Footswitch
H 310 SA – H 400 SA
Semi-automatic horizontal Bandsaws forquick and easy setup and operation.
Major components are massive for solid, vibration-free production cutting.
Machine operation is full cycle, semi-automatic. Material size is automatically sensed by the sawframe.
With the push of a single button, the vise clamps, sawframe makes the cut at preset rate, automatically returns to clear workpiece, vise opens, ready for the next cut.
Production sawing can be very fast!
Fully hydraulic, with free-standing operators console that may be conveniently placed in the most advantageous operator location.
Standard Equipment One HSS bi-metal sawblade
Low-volt control
Low-volt/undervolt shutoff
Blade tension indicator
Broken blade shutoff
Blade cleaning brush
Infeed & outfeed material support rollers
TEFC 3 phase drive motor
Totally enclosed worm gear transmission
Full Coolant System, Flushing hose
Full Blade Guarding, easily removed for blade change
Operators Manual/Parts list/Schematics
Tool kit
SPECIFICATIONS | KS 450 | KS 600 |
SIZE CAPACITY | 14″ | 20″ |
BLADE DRIVE HP | 3 | 4 |
Blade width | 1.25” | 2.5 |
BLADE SPEEDS | 60-360 fpm | 60-360 fpm |
BLADE SIZE | 1″ x 12′ 10″ | 1 1/4″ x 17″ 5″ |
MATERIAL WORKING HEIGHT | 33″ | 32″ |
COOOLANT TANK CAPACITY | 10 Gal | 10 Gal |
VISE OPENING | 18 Gal | 24 Gal |
MACHINE WEIGHT | 2200 lb | 3200 lb |
FOOTPRINT | 55 X 77″ | 60 x 98″ |
AVAILABLE ELECTRICALS | 3 Phase | 3 Phase |
CAPACITY DETAILS | 14″ 12″ 6″ 12″ 8″ |
20″ 17″ 9″ 17″ 12″ |
Models H6A-NC and H6 SA
Double column mitering bandsawing machines. Both feature a canted (6 degrees) sawframe.
Mitering from 0-60 degrees. All functions are fully hydraulic, with free-standing operators console that may be conveniently placed in the most advantageous operator location.
Saw feed controls are done with precision control valves.
The H6A-NC barfeed is a true shuttle-vise machine.
The machine is fully programmable to automatically program and store jobs for later recall.
Two saw vises on the infeed side ensure the material is clamped and never released during all feeding and sawing
operations. Barfeeder travels on linear guides, and driven by heavy duty ball screw for maximum accuracy.
Both feeder vise jaws clamp & unclamp, to facilitate crooked material. Scrap remnant end; a short 4”
Operation is straightforward and logical. The machine may be used as a single cut (semi-automatic) or fully automatic machine to repetitively cut your material to length.
You program the length, size of material, blade speed and quantity at the keyboard.
SPECIFICATIONS | H6 SA | KS 600 |
Blade Drive | 5HP | 7HP |
Blade Speeds | 60‐360 FPM | 60‐360 FPM |
Blade Size | 1¼ X 17’ 5” | 2.51¼ X 17’ 5” |
Material Work Height | 32¼” | 32¼” |
Vise Opening | 23½“ | 23½” |
Machine Weight | 4000 Lbs | 5100 Lbs |
Footprint | 49” x 112” | 104” x 112” |
Electricals | 3 Phase | 3 Phase |
Capacity Chart | 18 Gal | 24 Gal |
90 Degrees | 20“ | 20“ |
45 Degrees | 17½“ | 17½“ |
60 Degrees | 9½“ | 9½“ |