A higher angle on the top bevel (+30°) gives this saw an extra-sharp shearing action to slice through single or double-sided laminates without chipping. These blades are good for laminates, melamine, coreboard and other composite materials. Made with Micro-Sheen C-4 sub-micron carbide for an extended life.
| DIAMETER | TEETH | BORE AND PINHOLE | KERF | PLATE | DESIGN | HOOK | ORDER ID |
|---|---|---|---|---|---|---|---|
| 180mm | 36T | 30mm | 2.9mm | 2.0mm | **HF | -5 | LM18036HF |
| 8″ | 64T | 5/8″ | .118″ | .079″ | HATB | -5 | LM864 |
| 220mm | 42T | 30mm, 2/7/42 | 3.2mm | 2.2mm | **HF | 10 | LMH22042* |
| 220mm | 64T | 30mm, 2/7/42 | 3.0mm | 2.2mm | HATB | -5 | LM22064* |
| 250mm | 80T | 30mm, 2/7/42 | 3.2mm | 2.2mm | HATB | -5 | LM2503080* |
| 10″ | 48T | 5/8″ | .126″ | .087″ | **HF | 10 | LM1048HF |
| 10″ | 80T | 5/8″ | .102″max. cut 1″ | .071″ | HATB | 0 | LM1080X |
| 10″ | 80T | 5/8″ | .126″ | .087″ | HATB | -5 | LM1080 |
| 10″ | 80T | 5/8″ | .126″ | .087″ | TCG | -5 | LM1080TCG |
| 300mm | 60T | 30mm, 2 +2 PH | 3.2mm | 2.2mm | **HF | 10 | LMH30060 |
| 300mm | 80T | 30mm, 2 +2 PH | 3.2mm | 2.2mm | HATB | -5 | LM30080* |
| 300mm | 100T | 30mm, 2 +2 PH | 3.2mm | 2.2mm | HATB | -5 | LM30010* |
| 12″ | 80T | 1″ | .134″ | .094″ | HATB | -5 | LM1280 |
| 12″ | 100T | 1″ | .134″ | .094″ | HATB | -5 | LM1210 |
| 350mm | 96T | 30mm, 2+2 PH | 3.6mm | 2.8mm | HATB | -5 | LM3503096 |
| 14″ | 100T | 1″ | .142″ | .110″ | HATB | -5 | LM1410 |
| 16″ | 100T | 1″ | .158″ | .118″ | HATB | -5 | LM1610 |
| 18″ | 80T | 30mm, 2+2 PH | .138″ | .110″ | **HF | 10 | LMHF1880 |
Notes
* For use on Holz-Her or Striebig vertical panel saw.
**Hollow Face Grind