Thin saws keep material waste to a minimum and require less horsepower to cut the material efficiently. Use these in place of standard kerf blades.
| DIAMETER | TEETH | BORE AND PINHOLE | KERF | PLATE | DESIGN | HOOK | ORDER ID |
|---|---|---|---|---|---|---|---|
| 8″ | 60T | 5/8″ | .080″ | .055″ | TCG | 15 | TH860T |
| 8 1/4″ | 24T | 5/8″ | .080″ | .055″ | ATB | 15 | TH82524 |
| 8 1/4″ | 40T | 5/8″ | .080″ | .055″ | ATB | 15 | TH82540 |
| 8 1/4″ | 60T | 5/8″ | .080″ | .055″ | ATB | 15 | TH82560A |
| 8 1/2″ | 40T | 5/8″ | .080″ | .055″ | ATB | 15 | TH85040 |
| 8 1/2″ | 60T | 5/8″ | .080″ | .055″ | ATB | 15 | TH8506080 |
| 8 1/2″ | 60T | 5/8″ | .102″ | .071″ | TCG | 15 | TH85060T |
| 10″ | 40T | 5/8″ | .080″ | .055″ | ATB | 15 | TH104080 |
| 10″ | 40T | 5/8″ | .095″ | .063″ | ATB | 15 | TH104095 |
| 10″ | 60T | 5/8″ | .080″ | .059″ | ATB | 15 | TH106080 |
| 10″ | 60T | 5/8″ | .080″ | .060″ | ATB | -2 | RATH106080 |
| 10″ | 60T | 5/8″ | .095″ | .063″ | ATB | 15 | TH106095 |
| 10″ | 60T | 5/8″ | .095″ | .063″ | TCG | 15 | TH106095T |
| 10″ | 80T | 5/8″ | .080″ | .055″ | ATB | 15 | TH108080 |
| 10″ | 80T | 5/8″ | .095″ | .063″ | ATB | 15 | TH108095A |
| 10″ | 80T | 5/8″ | .095″ | .063″ | TCG | 15 | TH108095T |
| 12″ | 60T | 1″ | .110″ | .079″ | ATB | 15 | TH1260 |
| 12″ | 80T | 1″ | .110″ | .079″ | ATB | 15 | TH1280 |
| 12″ | 80T | 1″ | .110″ | .079″ | ATB | -5 | RATH1280A |
| 12″ | 80T | 1″ | .110″ | .079″ | TCG | 15 | TH1280T |
| 12″ | 80T | 1″ | .110″ | .079″ | TCG | -5 | RATH1280T |
| 12″ | 100T | 1″ | .102″ | .071″ | ATB | 15 | TH1210A |
| 12″ | 100T | 1″ | .102″ | .071″ | TCG | 15 | TH1210T |
Thin Rim Saws
Designed for cutting fine, fragile and thin-walled material. Thin kerf helps reduce chipping when cutting very thin material. Automatically-brazed premium-grade carbide tips increase the life of saw blade.
| DIAMETER | TEETH | BORE AND PINHOLE | KERF | PLATE | DESIGN | HUB | ORDER ID |
|---|---|---|---|---|---|---|---|
| 10″ | 80T | 5/8″ | 2.0mm | 1.5mm | TCG | 2.0mm | TM1080 |
| 12″ | 100T | 1″ | 2.2mm | 1.6mm | TCG | 2.2mm | TM1210 |
Ultra Thin Saws
Designed for cutting very soft, thin, expensive material, allowing for very little waste. Not for cutting hardwoods. Please consult us before choosing this saw blade. (Use stabilizer for stability!) Limited Warranty
| DIAMETER | TEETH | BORE AND PINHOLE | KERF | PLATE | DESIGN | HOOK | ORDER ID |
|---|---|---|---|---|---|---|---|
| 7 1/4″ | 80T | 5/8″ | .055″ | .039″ | ATB | 15 | UT72580 |
| 8″ | 80T | 5/8″ | .055″ | .039″ | ATB | 15 | UT880 |
| 10″ | 100T | 5/8″ | .071″ | .047″ | ATB | 15 | UT1010 |
| 12″ | 100T | 1″ | .080″ | .055″ | ATB | 15 | UT1210 |