INDUSTRIAL SERIES for NF

Home » Tenryu » INDUSTRIAL SERIES for NF

INDUSTRIAL SERIES for NON-FERROUS

TENRYU has once again raised the standards in non-ferrous cutting.

Introducing the new IA Series

  • Up to 20″ Diameter
  • Resin filled laser cut slots to reduce noise and reduce vibration
  • Same market leading thin-kerf design to reduce cutting waste and improve sharp life
  • Still excellent value

INDUSTRIAL SERIES for NON-FERROUS

MODEL # DIA. TEETH ARBOR GRIND KERF RAKE APPLICATION
IA-18560D 7-1/4″ 60 5/8″KO TCG .079″ 0 General purpose
IA-20360DN 8″ 60 5/8″KO TCG .087″ -5 General purpose
IA-21060DN 8-1/4″ 60 5/8″KO TCG .087″ -5 General purpose
IA-21660DN 8-1/2″ 60 5/8″KO TCG .087″ -5 General purpose
IA-25560DN 10″ 60 5/8″ TCG .087″ -5 Thick stock
IA-25580DN 10″ 80 5/8″ TCG .094″ -5 General purpose
IA-255100DN 10″ 100 5/8″ TCG .094″ -5 Thin stock
IA-30580DN 12″ 80 1″ TCG .094″ -5 General purpose
IA-305100DN 12″ 100 1″ TCG .110″ -5 Thin stock
IA-355100DN 14″ 100 1″ TCG .118″ -5 General purpose
IA-405120DN 16″ 120 1″ TCG .134″ -5 General purpose
IA-455120DN 18″ 120 1″ TCG .142″ -5 General purpose
IA-510120DN 20″ 120 1″ TCG .150″ -5 General purpose

Specialty Grind for Thin Stock

TENRYU introduces an unique grind of non-ferrous cutting blade series for very thin stock, such as picture frame moulding, radiator fins or other thin-walled aluminum extruded materials.

The regular INDUSTRIAL SERIES for NON-FERROUS has the anti-noise and anti-vibration design. However, this specialty thin stock non-ferrous cutting blade series performs even quieter and with less vibration. There is almost no deformation of the material after cutting and much less high pitch noise during the cut.

INDUSTRIAL SERIES for NON-FERROUS

MODEL # DIA. TEETH ARBOR GRIND KERF RAKE APPLICATION
IA-25596BX1 10″ 96 5/8″ MTCG .094″ -5 Chip/Miter/Radial Arm Saw
IA-300108BX3 300mm 108 30mm MTCG .110″ -5 Double Miter Saw
IA-305108BX1 12″ 108 5/8″ MTCG .110″ -5 Miter/Double Miter Saw
IA-305108BX2 12″ 108 1″ MTCG .110″ -5 Miter/Double Miter Saw